build quantlibXL in Visual Studio

classic Classic list List threaded Threaded
6 messages Options
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

build quantlibXL in Visual Studio

Wenhai Zhang, CLSA

Hi team,

 

I tried to build the quantLibXL in Visual Studio 2013. However, I always got the following error during the building process:

 

C:\Development\boost_1_64_0\boost/type_traits/common_type.hpp(50) : see reference to class template instantiation 'boost::common_type<T1,T2,T...>' being compiled

3>C:\Development\boost_1_64_0\boost/type_traits/detail/mp_defer.hpp(50): fatal error C1001: An internal error has occurred in the compiler.

3>  (compiler file 'f:\dd\vctools\compiler\cxxfe\sl\p1\c\p1types.cpp', line 192)

3>   To work around this problem, try simplifying or changing the program near the locations listed above.

3>  Please choose the Technical Support command on the Visual C++

 

The error is pointed to the following source code in the common_type.hpp:

template<class T1, class T2, class... T>

struct common_type<T1, T2, T...>: type_traits_detail::mp_defer<type_traits_detail::common_type_fold, T1, T2, T...>

{

};

 

 

Would you please give me some suggestion to solve this issue? Thanks in advance.

 

Regards,

Wenhai

The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices.
These can be viewed at
https://www.clsa.com/disclaimer.html or sent to you upon request.
CLSA is ISO14001 certified and committed to reducing environmental impact.


------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
QuantLib-users mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/quantlib-users
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: build quantlibXL in Visual Studio

Eric Ehlers-3
Hello,

Any clue as to which line (or file) of QuantLibXL source code triggers
the error?

Google tells me that that error can sometimes be fixed by turning off
optimization.

Regards,
Eric

On 2017-06-16 10:26, Wenhai Zhang, CLSA wrote:

>
> Hi team,
>
> I tried to build the quantLibXL in Visual Studio 2013. However, I
> always got the following error during the building process:
>
> C:\Development\boost_1_64_0\boost/type_traits/common_type.hpp(50) :
> see reference to class template instantiation
> 'boost::common_type<T1,T2,T...>' being compiled
>
> 3>C:\Development\boost_1_64_0\boost/type_traits/detail/mp_defer.hpp(50):
> fatal error C1001: An internal error has occurred in the compiler.
>
> 3> (compiler file 'f:\dd\vctools\compiler\cxxfe\sl\p1\c\p1types.cpp',
> line 192)
>
> 3> To work around this problem, try simplifying or changing the
> program near the locations listed above.
>
> 3> Please choose the Technical Support command on the Visual C++
>
> The error is pointed to the following source code in the common_type.hpp:
>
> template<class T1, class T2, class... T>
>
> struct common_type<T1, T2, T...>:
> type_traits_detail::mp_defer<type_traits_detail::common_type_fold, T1,
> T2, T...>
>
> {
>
> };
>
> Would you please give me some suggestion to solve this issue? Thanks
> in advance.
>
> Regards,
>
> Wenhai
>
> The content of this communication is intended for the recipient and is
> subject to CLSA Legal and Regulatory Notices.
> These can be viewed at https://www.clsa.com/disclaimer.htmlor sent to
> you upon request.
> /*CLSA is ISO14001 certified and committed to reducing environmental
> impact.*/
>
>
>
> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>
>
> _______________________________________________
> QuantLib-users mailing list
> [hidden email]
> https://lists.sourceforge.net/lists/listinfo/quantlib-users


------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
QuantLib-users mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/quantlib-users
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: build quantlibXL in Visual Studio

Wenhai Zhang, CLSA
Hi Eric,

Thanks. I have solved it by turning on the incremental linking.

Regards,
Wenhai

-----Original Message-----
From: Eric Ehlers [mailto:[hidden email]]
Sent: Wednesday, June 21, 2017 2:20 AM
To: Wenhai Zhang, CLSA <[hidden email]>; [hidden email]
Subject: Re: [Quantlib-users] build quantlibXL in Visual Studio

Hello,

Any clue as to which line (or file) of QuantLibXL source code triggers the error?

Google tells me that that error can sometimes be fixed by turning off optimization.

Regards,
Eric

On 2017-06-16 10:26, Wenhai Zhang, CLSA wrote:

>
> Hi team,
>
> I tried to build the quantLibXL in Visual Studio 2013. However, I
> always got the following error during the building process:
>
> C:\Development\boost_1_64_0\boost/type_traits/common_type.hpp(50) :
> see reference to class template instantiation
> 'boost::common_type<T1,T2,T...>' being compiled
>
> 3>C:\Development\boost_1_64_0\boost/type_traits/detail/mp_defer.hpp(50):
> fatal error C1001: An internal error has occurred in the compiler.
>
> 3> (compiler file 'f:\dd\vctools\compiler\cxxfe\sl\p1\c\p1types.cpp',
> line 192)
>
> 3> To work around this problem, try simplifying or changing the
> program near the locations listed above.
>
> 3> Please choose the Technical Support command on the Visual C++
>
> The error is pointed to the following source code in the common_type.hpp:
>
> template<class T1, class T2, class... T>
>
> struct common_type<T1, T2, T...>:
> type_traits_detail::mp_defer<type_traits_detail::common_type_fold, T1,
> T2, T...>
>
> {
>
> };
>
> Would you please give me some suggestion to solve this issue? Thanks
> in advance.
>
> Regards,
>
> Wenhai
>
> The content of this communication is intended for the recipient and is
> subject to CLSA Legal and Regulatory Notices.
> These can be viewed at https://www.clsa.com/disclaimer.htmlor sent to
> you upon request.
> /*CLSA is ISO14001 certified and committed to reducing environmental
> impact.*/
>
>
>
> ----------------------------------------------------------------------
> -------- Check out the vibrant tech community on one of the world's
> most engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>
>
> _______________________________________________
> QuantLib-users mailing list
> [hidden email]
> https://lists.sourceforge.net/lists/listinfo/quantlib-users

The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices.
These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request.
CLSA is ISO14001 certified and committed to reducing environmental impact.


------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
QuantLib-users mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/quantlib-users
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: build quantlibXL in Visual Studio

Wenhai Zhang, CLSA
In reply to this post by Eric Ehlers-3
Hi Eric,

Sorry to bother you again.  Would you please suggest why it takes so long time to build the quantlibxlStatic? I am using Visual 2013. I found it took very long time in the last step to build QuantLibXLStatic.  

Regards,
Wenhai

-----Original Message-----
From: Wenhai Zhang, CLSA
Sent: Wednesday, June 21, 2017 7:27 AM
To: 'Eric Ehlers' <[hidden email]>; [hidden email]
Subject: RE: [Quantlib-users] build quantlibXL in Visual Studio

Hi Eric,

Thanks. I have solved it by turning on the incremental linking.

Regards,
Wenhai

-----Original Message-----
From: Eric Ehlers [mailto:[hidden email]]
Sent: Wednesday, June 21, 2017 2:20 AM
To: Wenhai Zhang, CLSA <[hidden email]>; [hidden email]
Subject: Re: [Quantlib-users] build quantlibXL in Visual Studio

Hello,

Any clue as to which line (or file) of QuantLibXL source code triggers the error?

Google tells me that that error can sometimes be fixed by turning off optimization.

Regards,
Eric

On 2017-06-16 10:26, Wenhai Zhang, CLSA wrote:

>
> Hi team,
>
> I tried to build the quantLibXL in Visual Studio 2013. However, I
> always got the following error during the building process:
>
> C:\Development\boost_1_64_0\boost/type_traits/common_type.hpp(50) :
> see reference to class template instantiation
> 'boost::common_type<T1,T2,T...>' being compiled
>
> 3>C:\Development\boost_1_64_0\boost/type_traits/detail/mp_defer.hpp(50):
> fatal error C1001: An internal error has occurred in the compiler.
>
> 3> (compiler file 'f:\dd\vctools\compiler\cxxfe\sl\p1\c\p1types.cpp',
> line 192)
>
> 3> To work around this problem, try simplifying or changing the
> program near the locations listed above.
>
> 3> Please choose the Technical Support command on the Visual C++
>
> The error is pointed to the following source code in the common_type.hpp:
>
> template<class T1, class T2, class... T>
>
> struct common_type<T1, T2, T...>:
> type_traits_detail::mp_defer<type_traits_detail::common_type_fold, T1,
> T2, T...>
>
> {
>
> };
>
> Would you please give me some suggestion to solve this issue? Thanks
> in advance.
>
> Regards,
>
> Wenhai
>
> The content of this communication is intended for the recipient and is
> subject to CLSA Legal and Regulatory Notices.
> These can be viewed at https://www.clsa.com/disclaimer.htmlor sent to
> you upon request.
> /*CLSA is ISO14001 certified and committed to reducing environmental
> impact.*/
>
>
>
> ----------------------------------------------------------------------
> -------- Check out the vibrant tech community on one of the world's
> most engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>
>
> _______________________________________________
> QuantLib-users mailing list
> [hidden email]
> https://lists.sourceforge.net/lists/listinfo/quantlib-users

The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices.
These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request.
CLSA is ISO14001 certified and committed to reducing environmental impact.


------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
QuantLib-users mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/quantlib-users
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: build quantlibXL in Visual Studio

Eric Ehlers-3
Hi Wenhai,

It's no bother at all but I am afraid I don't have a suitable answer.  
When we implemented QuantLibXL the current version of Visual Studio back
then was VC9 if I remember correctly.  At that time the build times were
acceptable.  With each new release of Visual Studio the build times have
become longer and longer.  I suspect that the linker dislikes something
about the large number of objects derived from the autogenerated source
code but I haven't investigated.  The workarounds are not very clever -
use bigger hardware, let it run overnight, use a different configuration
(some are quicker than others), switch back to an older version of
Visual Studio.

When I was implementing the new reposit build I was paying close
attention to this problem, the build times were OK and I planned to fix
them if they got too slow, but I didn't have time to complete the project.

Kind Regards,
Eric

On 2017-07-26 08:01, Wenhai Zhang, CLSA wrote:

> Hi Eric,
>
> Sorry to bother you again.  Would you please suggest why it takes so long time to build the quantlibxlStatic? I am using Visual 2013. I found it took very long time in the last step to build QuantLibXLStatic.
>
> Regards,
> Wenhai
>
> -----Original Message-----
> From: Wenhai Zhang, CLSA
> Sent: Wednesday, June 21, 2017 7:27 AM
> To: 'Eric Ehlers' <[hidden email]>; [hidden email]
> Subject: RE: [Quantlib-users] build quantlibXL in Visual Studio
>
> Hi Eric,
>
> Thanks. I have solved it by turning on the incremental linking.
>
> Regards,
> Wenhai
>
> -----Original Message-----
> From: Eric Ehlers [mailto:[hidden email]]
> Sent: Wednesday, June 21, 2017 2:20 AM
> To: Wenhai Zhang, CLSA <[hidden email]>; [hidden email]
> Subject: Re: [Quantlib-users] build quantlibXL in Visual Studio
>
> Hello,
>
> Any clue as to which line (or file) of QuantLibXL source code triggers the error?
>
> Google tells me that that error can sometimes be fixed by turning off optimization.
>
> Regards,
> Eric
>
> On 2017-06-16 10:26, Wenhai Zhang, CLSA wrote:
>> Hi team,
>>
>> I tried to build the quantLibXL in Visual Studio 2013. However, I
>> always got the following error during the building process:
>>
>> C:\Development\boost_1_64_0\boost/type_traits/common_type.hpp(50) :
>> see reference to class template instantiation
>> 'boost::common_type<T1,T2,T...>' being compiled
>>
>> 3>C:\Development\boost_1_64_0\boost/type_traits/detail/mp_defer.hpp(50):
>> fatal error C1001: An internal error has occurred in the compiler.
>>
>> 3> (compiler file 'f:\dd\vctools\compiler\cxxfe\sl\p1\c\p1types.cpp',
>> line 192)
>>
>> 3> To work around this problem, try simplifying or changing the
>> program near the locations listed above.
>>
>> 3> Please choose the Technical Support command on the Visual C++
>>
>> The error is pointed to the following source code in the common_type.hpp:
>>
>> template<class T1, class T2, class... T>
>>
>> struct common_type<T1, T2, T...>:
>> type_traits_detail::mp_defer<type_traits_detail::common_type_fold, T1,
>> T2, T...>
>>
>> {
>>
>> };
>>
>> Would you please give me some suggestion to solve this issue? Thanks
>> in advance.
>>
>> Regards,
>>
>> Wenhai
>>
>> The content of this communication is intended for the recipient and is
>> subject to CLSA Legal and Regulatory Notices.
>> These can be viewed at https://www.clsa.com/disclaimer.htmlor sent to
>> you upon request.
>> /*CLSA is ISO14001 certified and committed to reducing environmental
>> impact.*/
>>
>>
>>
>> ----------------------------------------------------------------------
>> -------- Check out the vibrant tech community on one of the world's
>> most engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>
>>
>> _______________________________________________
>> QuantLib-users mailing list
>> [hidden email]
>> https://lists.sourceforge.net/lists/listinfo/quantlib-users
> The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices.
> These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request.
> CLSA is ISO14001 certified and committed to reducing environmental impact.
>


------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
QuantLib-users mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/quantlib-users
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: build quantlibXL in Visual Studio

Wenhai Zhang, CLSA
Thanks, Eric. I have solved it by changing the linker from x86_amd64 to amd64.

Regards,
Wenhai

-----Original Message-----
From: Eric Ehlers [mailto:[hidden email]]
Sent: Thursday, July 27, 2017 4:18 AM
To: Wenhai Zhang, CLSA <[hidden email]>
Cc: [hidden email]
Subject: Re: [Quantlib-users] build quantlibXL in Visual Studio

Hi Wenhai,

It's no bother at all but I am afraid I don't have a suitable answer.  
When we implemented QuantLibXL the current version of Visual Studio back then was VC9 if I remember correctly.  At that time the build times were acceptable.  With each new release of Visual Studio the build times have become longer and longer.  I suspect that the linker dislikes something about the large number of objects derived from the autogenerated source code but I haven't investigated.  The workarounds are not very clever - use bigger hardware, let it run overnight, use a different configuration (some are quicker than others), switch back to an older version of Visual Studio.

When I was implementing the new reposit build I was paying close attention to this problem, the build times were OK and I planned to fix them if they got too slow, but I didn't have time to complete the project.

Kind Regards,
Eric

On 2017-07-26 08:01, Wenhai Zhang, CLSA wrote:

> Hi Eric,
>
> Sorry to bother you again.  Would you please suggest why it takes so long time to build the quantlibxlStatic? I am using Visual 2013. I found it took very long time in the last step to build QuantLibXLStatic.
>
> Regards,
> Wenhai
>
> -----Original Message-----
> From: Wenhai Zhang, CLSA
> Sent: Wednesday, June 21, 2017 7:27 AM
> To: 'Eric Ehlers' <[hidden email]>;
> [hidden email]
> Subject: RE: [Quantlib-users] build quantlibXL in Visual Studio
>
> Hi Eric,
>
> Thanks. I have solved it by turning on the incremental linking.
>
> Regards,
> Wenhai
>
> -----Original Message-----
> From: Eric Ehlers [mailto:[hidden email]]
> Sent: Wednesday, June 21, 2017 2:20 AM
> To: Wenhai Zhang, CLSA <[hidden email]>;
> [hidden email]
> Subject: Re: [Quantlib-users] build quantlibXL in Visual Studio
>
> Hello,
>
> Any clue as to which line (or file) of QuantLibXL source code triggers the error?
>
> Google tells me that that error can sometimes be fixed by turning off optimization.
>
> Regards,
> Eric
>
> On 2017-06-16 10:26, Wenhai Zhang, CLSA wrote:
>> Hi team,
>>
>> I tried to build the quantLibXL in Visual Studio 2013. However, I
>> always got the following error during the building process:
>>
>> C:\Development\boost_1_64_0\boost/type_traits/common_type.hpp(50) :
>> see reference to class template instantiation
>> 'boost::common_type<T1,T2,T...>' being compiled
>>
>> 3>C:\Development\boost_1_64_0\boost/type_traits/detail/mp_defer.hpp(50):
>> fatal error C1001: An internal error has occurred in the compiler.
>>
>> 3> (compiler file 'f:\dd\vctools\compiler\cxxfe\sl\p1\c\p1types.cpp',
>> line 192)
>>
>> 3> To work around this problem, try simplifying or changing the
>> program near the locations listed above.
>>
>> 3> Please choose the Technical Support command on the Visual C++
>>
>> The error is pointed to the following source code in the common_type.hpp:
>>
>> template<class T1, class T2, class... T>
>>
>> struct common_type<T1, T2, T...>:
>> type_traits_detail::mp_defer<type_traits_detail::common_type_fold,
>> T1, T2, T...>
>>
>> {
>>
>> };
>>
>> Would you please give me some suggestion to solve this issue? Thanks
>> in advance.
>>
>> Regards,
>>
>> Wenhai
>>
>> The content of this communication is intended for the recipient and
>> is subject to CLSA Legal and Regulatory Notices.
>> These can be viewed at https://www.clsa.com/disclaimer.htmlor sent to
>> you upon request.
>> /*CLSA is ISO14001 certified and committed to reducing environmental
>> impact.*/
>>
>>
>>
>> ---------------------------------------------------------------------
>> -
>> -------- Check out the vibrant tech community on one of the world's
>> most engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>>
>>
>> _______________________________________________
>> QuantLib-users mailing list
>> [hidden email]
>> https://lists.sourceforge.net/lists/listinfo/quantlib-users
> The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices.
> These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request.
> CLSA is ISO14001 certified and committed to reducing environmental impact.
>

The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices.
These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request.
CLSA is ISO14001 certified and committed to reducing environmental impact.
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
QuantLib-users mailing list
[hidden email]
https://lists.sourceforge.net/lists/listinfo/quantlib-users
Loading...